Products
|
LC tyre changer cylinder
Work Pressure: 16(MPa)
Application: Industrial equipment, Tyre changer
Speed: 0.3(m/s) Stroke: 131-1135(mm)
Bore: 40-70(mm) Rod: 20、 30(mm)
Speed Ratio: 1.23/1.33
Application: Industrial equipment, Tyre changer
Speed: 0.3(m/s) Stroke: 131-1135(mm)
Bore: 40-70(mm) Rod: 20、 30(mm)
Speed Ratio: 1.23/1.33
References:
Serial # | Installation | Bore | Rod | Stroke | Install distance | Work pressure | Speed Ratio | Work Condiction |
9298000 | Cross tube | 70 | 30 | 130 | 367 | 16 | 1.23 | Normal temp. None special pollution |
9293000 | Cross tube +Rod end thread | 70 | 30 | 850 | 1135 | 16 | 1.23 | |
9292000 | Cross tube +Rod end thread | 70 | 30 | 620 | 823 | 16 | 1.23 | |
9291000 | Cross tube +Rod end thread | 70 | 30 | 428 | 592.5 | 16 | 1.23 | |
9295000 | Cap end pin hole +Rod end thread | 45 | 20 | 181 | 328 | 16 | 1.25 | |
9297000 | Cap end pin hole +Rod end thread | 45 | 20 | 131 | 293 | 16 | 1.25 | |
1320000 | Cap end thread hole, Rod end cross tube | 40 | 20 | 435 | 553 | 16 | 1.33 | |
1420000 | Middle round flange | 40 | 20 | 720 | 860 | 16 | 1.33 | |
1130000 | Cap end thread hole, Rod end cross tube | 40 | 20 | 285 | 430 | 16 | 1.33 |